Modernisation of bridge structures - apply for funding

Programme application

In order for a bridge modernisation measure to be included in the programme, proof must be provided that the maintenance planning includes all measures to eliminate existing deficits in terms of load-bearing capacity and serviceability.
This applies to structures whose load-bearing properties have deteriorated due to

• increased traffic loads,
• Ageing of the building fabric,
• Deficits in the original design standards,
• problematic design and material-related parameters such as hollow core slabs, coupling joints or the use of prestressing steels that are at risk of stress corrosion cracking

no longer meet current and future requirements.

For a planned refurbishment/reinforcement of the existing structure, it must be demonstrated that a remaining service life of at least 25 years can be achieved as a criterion for long-term viability.

If a (partial) replacement construction is planned, its economic viability compared to other maintenance measures must be demonstrated on the basis of an economic viability study carried out in accordance with the RI-WI-BRÜ.

Application

Attach the following to the application for a grant (see Section B No. 2.2 of the VwV-LGVFG)

• a cost and financing plan and a declaration that the project has not yet begun (Section 3.2 VV-LHO to § 44)
• a design plan in accordance with HOAI, Lph. 3, which must be prepared in accordance with RE for measures to modernise bridge structures in accordance with number 1.10 in accordance with RAB-ING (including structural plans and design statics) in compliance with RE-ING and RIZ-ING. The cost calculation is to be carried out in accordance with AKVS.
• landscape conservation plan including species protection contribution and any necessary environmental studies in accordance with RE
• proof that a safety audit has been carried out in accordance with RSAS (with the exception of safety measures at railway crossings without significant intervention in the road space), including the associated statement
• Information on the preparation of the project, in particular on the status of land acquisition, building law approval (development plan, planning approval) and the willingness of third parties to participate (administrative agreements)
• a valuation report on the land acquisition
• a planning and construction schedule
• a statement that the project takes into account the needs of people with disabilities or mobility impairments with the aim of achieving complete accessibility and complies with the relevant state legislation on accessibility
• If municipal disability representatives or disability councils have been appointed, confirmation that they were involved in the project planning must be enclosed. If a local authority does not have disabled persons' representatives or advisory councils, confirmation of the involvement of the relevant associations within the meaning of Section 12 (1) L-BGG must be enclosed instead.
• In the case of projects for the modernisation of bridge structures on federal, state, district or municipal roads under the responsibility of the districts or municipalities, including cycle path and pedestrian bridges that do not meet the requirements of Section 3(1)(1a) LGVFG, the planned bridge modernisation measure must be presented and described in accordance with the RAB-ING when applying for inclusion in the programme.
  The documents required for this are listed in the Bridges Guideline.

If necessary, the authorising body may request further planning documents or expert opinions.